Feature:
- Output power: 1200W @ 4 ohms stereo, 800W @ 8 ohms stereo
- High-current toroidal transformers for greater power and low noise
- Balanced 1/4″ TRS and XLR inputs for maximum flexibility
- Grounding / Floating switch to avoid grounding loop
- Binding post and Speakon-type outputs
- Front mounted gain controls for easy access
- Signal and Peak LED indicators to monitor performance
- Short circuit, thermal, subsonic, RF protection, output DC offset
- Power on/off muting
Specification:
- Stereo Mode (driving both channels):8Ω 1kHz 0.1%THD 1600W, 4Ω 1kHz 0.1%THD 2400W
Bridge Mono Mode: 8Ω 1kHz 0.1%THD 4800W - System:
Output Circuitry: Class H
Input sensitivity @ 8Ω : 1.42 Vrms
Distortion (SMPTE-IM): <0.02%
Noise (unweighted 20 Hz – 20 kHz below rated output): 107 dB
Damping Factor: >500 @ 8Ω
Frequency Response: 20 Hz-20kHz +0/-1dB; -3dB points: 5Hz-50kHz
Input Impedance: 20 kΩ balanced; 10 kΩ unbalanced
Cooling: Continous variable-speed fan – rear-to-front air flow
Indicators: Power; Signal; Peak - Controls:
Front Panel: AC power switch & Gain knobs
Rear Panel: HPF; Clip; Limiter; Operating Mode; Circuit Breaker; Grounding/Floating
Operating Modes: Parallel; Stereo; Bridge Mono
Voltage Gain: 40 x (32 dB) - Connectors (each channel):
Input: XLR & 1/4” TRS
Output: Binding post & Speakon - Subwoofer Output:
Crossover 60 Hz; 90 Hz; 120 Hz - Protection Circuitry:
Amplifier Protection – Full short circuit / Open circuit / Thermal / Ultrasonic / RF protection / stable into mismatched loads
Load Protection – On/off muting / AC coupling / Triac crowbar (each channel) - Power Supply:
Power Consumption – 1000W
Power Requirement (depends on region) – 100~120VAC – 220~240VAC – 50/60Hz - Physical:
Dimensions (mm) – 482.6 x 133.5 x 376 mm
Dimensions (inches) – 19” x 5.25” x 14.8”
Weight (kg) – 20.3 kg
Weight (pounds) – 44.8 lbs
