Phonic Max 1500 Plus 900 Watt Power Amplifier

Category:

Feature:

  • Advanced powerful performance 3rd generation circuitry design
  • Output power: 450W @ 4 ohms per channel, 280W @ 8 ohms per channel
  • Front mounted gain controls
  • High continuous current output from robust toroidal transformer
  • Switchable input peak limiter and selectable high pass filter (30Hz, 50Hz) to reduce distortion and protect speakers
  • Bridge mono and parallel mode LEDs
  • Fast Recovery design for lower distortion if clipping occurs
  • Very rugged housing
  • Active balanced inputs for low noise
  • Signal level at -40, -20, -10, protect and clip LED indicators to monitor performance
  • Ground Lift switch to prevent humming
  • Selectable stereo, parallel & bridge mono amp modes
  • Two ventilation variable speed fans
  • Speakon-type connectors and 5-way binding posts speaker outputs
  • XLR & 1/4″ TRS connectors for maximum input flexibility
  • Requires two standard rack units for mounting
  • Fits a standard 19″ rack

Specification:

  • MAX 1000 MAX 1500 Plus1 MAX 2500 Plus2
  • Stereo Mode (driving both channels): Continuous Average Output Power Per Channel
  • 8Ω EIA 1kHz 0.1%THD: 200W
  • 4Ω EIA 1kHz 0.1%THD: 300W
  • Bridge Mono Mode: Continuous Average Output Power
  • 8Ω EIA 1kHz 0.1%THD: 600W
  • Output Circuitry: Class AB Class H
  • Input Aensitivity @ 8Ω: 1.23V (+4dBu)
  • Distortion (SMPTE-IM): <0.01% <0.02%
    Noise (unweighted 20Hz-20KHz below rated output): 100dB
  • Damping Factor: >300 @ 8Ω
  • Frequency Response: 20 Hz-20KHz, +0/-1dB; -3dB points: 5Hz-50KHz
  • Input Impedance: 20 K Ω balanced, 10 K Ω unbalanced
  • Cooling: Continuous variable-speed fan, front-to-rear air flow
  • Connectors (each channel): Input: XLR and 1/4” TRS; Output: Speakon and binding posts
  • Indicators: Power: Blue LED; SIGNAL: Green LED; PEAK: Red LED
  • Front Panel: CH1 & CH2 GAIN knobs with 21 detents
  • Rear Panel: Slide switches: Operation mode: Parallel, Bridge, Stereo; Grounding/Floating; Current-Break reset button
  • Protection Circuitry: Short circuit, thermal, subsonic, RF protection, Output DC offset, Power on/off muting
  • Power Consumption: 600W
  • Power Requirement (depends on region): 100~120VAC, 220~240VAC, 50/60Hz
  • Dimensions: (WxHxD) 482 x 88 x 415mm (19” x 3.46” x 15.9”)
  • Weight: 10.16 kg (22.4 lbs)

Additional information

Weight 1.1 kg
Dimensions 30 × 26 × 11 cm