Amplifier Specifications:
- Power Source: 220 – 240 V AC, or 24 V DC
- Rated Output: 120 W
- Power Consumption: 124 W (EN60065), 8 A (DC operation at rated output)
- Frequency Response: 50 – 20,000 Hz (±3 dB)
- Distortion: 1% or less at 1 kHz, 1/3 rated power
- Input: MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins) MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack.
- Mute: Contact pin 4 – 5 closure input (for MIC 1)
- Output Speaker out: Balanced (floating), M3.5 screw terminal,
- Distance between barriers: 8.3 mm (0.33″)
- High impedance: 83 Ω (100 V), 42 Ω (70 V)
- Low impedance: 4 Ω (22 V)
- Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack
- Phantom Power: DC +21 V (MIC 1)
- S/N Ratio: 60 dB or more
- Tone Control Bass: ±10 dB at 100 Hz
- Treble: ±10 dB at 10 kHz
- Muting: MIC 1 overrides other input signals with 0 – 30 dB attenuation by mute terminal contact in MIC 1 DIN type connector.
- Finish Panel: ABS resin, black
- Case: Steel plate, black
- Dimensions: 420 (W) × 100.9 (H) × 360.3 (D) mm (16.54″ × 3.97″ × 14.19″)
- Weight: 10.8 kg (23.81 lb)
Horn Speaker SPECIFICATION:
- Applicable Drivers: TU-632M, TU-652M
- Sound Pressure Level: 110 dB (1 W, 1 m) (When operated with a driver.)
- Frequency Response: 200 Hz – 6,000 Hz (When operated with a driver.)
- Dust/Water Protection: IP65 (When operated with a driver.)
- Driver Coupling: 1 – 3/8 18 threads (inch screw)
- Operating Temperature: -20 °C to +55 °C (must be free from dew condensation)
- Finish: Horn flare and flange: Aluminum, White, powder coatingReflector horn: HIPS, WhiteBracket: Steel, White, powder coatingScrews and bolts: Stainless steel
- Dimensions: Φ500 × 357 (D) mm
- Weight: 2.7 kg
