Feature:
- Advanced powerful performance 3rd generation circuitry design
- Output power: 450W @ 4 ohms per channel, 280W @ 8 ohms per channel
- Front mounted gain controls
- High continuous current output from robust toroidal transformer
- Switchable input peak limiter and selectable high pass filter (30Hz, 50Hz) to reduce distortion and protect speakers
- Bridge mono and parallel mode LEDs
- Fast Recovery design for lower distortion if clipping occurs
- Very rugged housing
- Active balanced inputs for low noise
- Signal level at -40, -20, -10, protect and clip LED indicators to monitor performance
- Ground Lift switch to prevent humming
- Selectable stereo, parallel & bridge mono amp modes
- Two ventilation variable speed fans
- Speakon-type connectors and 5-way binding posts speaker outputs
- XLR & 1/4″ TRS connectors for maximum input flexibility
- Requires two standard rack units for mounting
- Fits a standard 19″ rack
Specification:
- MAX 1000 MAX 1500 Plus1 MAX 2500 Plus2
- Stereo Mode (driving both channels): Continuous Average Output Power Per Channel
- 8Ω EIA 1kHz 0.1%THD: 200W
- 4Ω EIA 1kHz 0.1%THD: 300W
- Bridge Mono Mode: Continuous Average Output Power
- 8Ω EIA 1kHz 0.1%THD: 600W
- Output Circuitry: Class AB Class H
- Input Aensitivity @ 8Ω: 1.23V (+4dBu)
- Distortion (SMPTE-IM): <0.01% <0.02%
Noise (unweighted 20Hz-20KHz below rated output): 100dB - Damping Factor: >300 @ 8Ω
- Frequency Response: 20 Hz-20KHz, +0/-1dB; -3dB points: 5Hz-50KHz
- Input Impedance: 20 K Ω balanced, 10 K Ω unbalanced
- Cooling: Continuous variable-speed fan, front-to-rear air flow
- Connectors (each channel): Input: XLR and 1/4” TRS; Output: Speakon and binding posts
- Indicators: Power: Blue LED; SIGNAL: Green LED; PEAK: Red LED
- Front Panel: CH1 & CH2 GAIN knobs with 21 detents
- Rear Panel: Slide switches: Operation mode: Parallel, Bridge, Stereo; Grounding/Floating; Current-Break reset button
- Protection Circuitry: Short circuit, thermal, subsonic, RF protection, Output DC offset, Power on/off muting
- Power Consumption: 600W
- Power Requirement (depends on region): 100~120VAC, 220~240VAC, 50/60Hz
- Dimensions: (WxHxD) 482 x 88 x 415mm (19” x 3.46” x 15.9”)
- Weight: 10.16 kg (22.4 lbs)
